 |
Model 420
Silicone damped Model 420 (M420) Level Sensor with indepedently adjustable trip angles for the "X" and "Y" axes. Typical applications include manlifts, cranes, scissor lifts, and mobile platforms.
- Dual Axis Sensing for X and Y Directions with independent adjustmets
- Adjustable trip angles and time delays for both X and Y axes- Significantly reduces the prototype phase
- Dual trip point capability - Provides an extended capability without adding a second sensor to the system
- Normally on or normally off versions
- Optional Bubble level Available - Provides visual reference to the horizon
- Viscously damped pendulum - Eliminates inadvertent outputs due to momentary movement
- Reverse polarity and short circuit protection - Needs no fuse, cannot be damaged by electrical mishap
|
|
| |
Specifications: |
| |
Electrical |
| |
Supply Voltage |
10-30 VDC |
| |
Output Current |
1.5 amp continuous |
| |
Idle Current Draw |
25 mA @ 12 V (no load)
35 mA @ 24 V (no load) |
| |
| |
Protection |
Reverse Polarity, Over-Voltage, Open/Shorted Signal Leads, Transient Voltage Supply |
| |
|
| |
Accuracy |
Trip point repeatable within ±.2° |
| |
Hysteresis |
0.3° |
| |
Environmental |
|
| |
Operating Temperature |
-40 - 70 degrees (C) |
| |
Protection |
Sealed Epoxy Potting (black) |
| |
Resistance |
Humidity, Water/Rain, Sun/UV Exposure |
| |
|
|
| |
Adjustments / Features: |
|
| |
Trip Angle |
.2° to 5 °(field adjustable) |
| |
Trip Delay |
0.5 to 5 seconds
(field adjustable) |
| |
|
|
| |
|
| |
|
|
Distributors | Contact Us | Company
